The trip computer is a microcomputercontrolled driver information system that displays information related to driving when the ignition switch is in the ON position. All stored driving information (except odometer, distance to empty and instant fuel economy) resets if the battery is disconnected. Press the or button for less than 1 second to Find out more info about Kia Ceed I ( 2006 – 2012 ) : How to adjust your handbrake without taking the rear wheels off to do so.This is how to adjust the cable, the shoes are set by removing the wheels and turnin Kia Cee'd: Trip computer / User Settings. 1. Stop the vehicle with the ignition switch in the ON position or engine running. 2. Press the button until the User setting mode is displayed. 3.You can change the item by pressing the button and select an item by pressing the button. Kia K4 Oil Service Required Maintenance Light Reset Quick and simple tutorial on how to reset the Kia K4 Oil Maintenance Service Required Indicator Warning light from the year 2014-2015-2016-2017-2018-2019-2020. STEP 1 Close all doors, put the gear to the park position. STEP 2 Turn the ignition on. On and the distance to service there so that's that one once on that menu press and hold the reset. More On and the distance to service there so that's that one once on that menu press and hold the reset. Button. Now the pressure about five seconds. The Kia Hi-Scan Pro Scan Tool DLC Cable 16 (P/N 09900-21100) will mate with this connector. For all Kia OBD II compliant vehicles, engine and transmission data are available at this connector. ABS, Traction Control System and SRS data are also available at this connector on some newer models, such as 2001 Optima (for earlier models like 2000 1. Disconnect the battery (-)terminal (A) and then (+)terminal (B). Remove the air duct and air cleaner assembly. Remove the battery mounting bracket (A) and the insulation pad (B), and then remove the battery. Disconnect the ECM connector (A), and then remove ECM (B) after removing the bolts/nut. 5. GT1G9v.

kia ceed 2010 service reset